-- -- Version: 9.80.0041 -- Date: 2022-09-24 18:40:56 -- -- Copyright 2022 @ Bosch Sicherheitssysteme Engineering GmbH -- -- Auto-generated file parsed from source code -- This MIB defines objects for an SNMP agent and provides the -- functionality to configure devices running firmware or software -- created by Bosch Sicherheitssysteme Engineering GmbH -- -- If the textual name of an OID ends on "...Table", this indicates -- that the following item, whose name ends on "...Entry", can -- have zero or more instances. For example: -- 1.3.6.1.4.1.3967.1.1.1.3 camnameTable -- 1.3.6.1.4.1.3967.1.1.1.3.1 camnameEntry -- 1.3.6.1.4.1.3967.1.1.1.3.1.1 camname -- To query a camname, extend the OID of the camname by the -- instance number, for example: -- 1.3.6.1.4.1.3967.1.1.1.3.1.1.2 camname -- for the camname of the second instance. -- -- -- List of traps: -- relay-output-state -- input-pin-state -- video-alarm-state -- motion-alarm-state -- connect-to -- disconnect-primitive -- viproc-alarm -- virtual-alarm-state -- poe-granted-power -- storage-list -- temp-sens -- eth-link-status -- hd-rec-buffer -- config-sealing-status -- sd-card-life-span-status -- login-limiter-message -- time-sc-connect-fail-msg -- -- -- All commands: -- 1.3.6.1.4.1.3967.1.1 sys -- 1.3.6.1.4.1.3967.1.1.1 identification -- 1.3.6.1.4.1.3967.1.1.1.1 unit-name -- 1.3.6.1.4.1.3967.1.1.1.2 unit-id -- 1.3.6.1.4.1.3967.1.1.1.3 camnameTable -- 1.3.6.1.4.1.3967.1.1.1.3.1 camnameEntry -- 1.3.6.1.4.1.3967.1.1.1.3.1.1 camname -- 1.3.6.1.4.1.3967.1.1.1.4 hardware-version -- 1.3.6.1.4.1.3967.1.1.1.5 software-version -- 1.3.6.1.4.1.3967.1.1.1.6 serial-number -- 1.3.6.1.4.1.3967.1.1.1.7 manufacturer-name -- 1.3.6.1.4.1.3967.1.1.2 time -- 1.3.6.1.4.1.3967.1.1.2.1 timezone -- 1.3.6.1.4.1.3967.1.1.2.2 ntp-server-ip-str -- 1.3.6.1.4.1.3967.1.1.2.3 time-sc-connect-fail-msg -- 1.3.6.1.4.1.3967.1.1.3 connection -- 1.3.6.1.4.1.3967.1.1.3.1 connect-to -- 1.3.6.1.4.1.3967.1.1.3.2 disconnect-primitive -- 1.3.6.1.4.1.3967.1.1.4 viproc -- 1.3.6.1.4.1.3967.1.1.4.1 viprocTable -- 1.3.6.1.4.1.3967.1.1.4.1.1 viprocEntry -- 1.3.6.1.4.1.3967.1.1.4.1.1.1 viproc-id -- 1.3.6.1.4.1.3967.1.1.4.1.1.2 viproc-mode -- 1.3.6.1.4.1.3967.1.1.5 aux -- 1.3.6.1.4.1.3967.1.1.5.1 oem-device-name -- 1.3.6.1.4.1.3967.1.1.5.2 oem-ext-id -- 1.3.6.1.4.1.3967.1.1.5.3 defaults -- 1.3.6.1.4.1.3967.1.1.5.4 factory-defaults -- 1.3.6.1.4.1.3967.1.1.5.5 board-reset -- 1.3.6.1.4.1.3967.1.1.5.6 boot-default-app -- 1.3.6.1.4.1.3967.1.1.5.7 led-blinking -- 1.3.6.1.4.1.3967.1.1.5.9 bsp-dev-errorTable -- 1.3.6.1.4.1.3967.1.1.5.9.1 bsp-dev-errorEntry -- 1.3.6.1.4.1.3967.1.1.5.9.1.1 bsp-dev-error -- 1.3.6.1.4.1.3967.1.1.5.10 livetime-max-temp -- 1.3.6.1.4.1.3967.1.1.5.11 livetime-min-temp -- 1.3.6.1.4.1.3967.1.1.5.12 livetime-op-minutes -- 1.3.6.1.4.1.3967.1.1.5.13 storage-list -- 1.3.6.1.4.1.3967.1.1.5.14 hd-rec-buffer -- 1.3.6.1.4.1.3967.1.1.5.15 sd-card-life-span-statusTable -- 1.3.6.1.4.1.3967.1.1.5.15.1 sd-card-life-span-statusEntry -- 1.3.6.1.4.1.3967.1.1.5.15.1.1 sd-card-life-span-status -- 1.3.6.1.4.1.3967.1.1.5.16 login-limiter-message -- 1.3.6.1.4.1.3967.1.1.6 power-supply -- 1.3.6.1.4.1.3967.1.1.7 temperatureTable -- 1.3.6.1.4.1.3967.1.1.7.1 temperatureEntry -- 1.3.6.1.4.1.3967.1.1.7.1.1 temp-sens -- 1.3.6.1.4.1.3967.1.1.8 fan-speedTable -- 1.3.6.1.4.1.3967.1.1.8.1 fan-speedEntry -- 1.3.6.1.4.1.3967.1.1.8.1.1 fan-speed -- 1.3.6.1.4.1.3967.1.1.9 cpu-loadTable -- 1.3.6.1.4.1.3967.1.1.9.1 cpu-loadEntry -- 1.3.6.1.4.1.3967.1.1.9.1.1 cpu-load-idle -- 1.3.6.1.4.1.3967.1.1.9.1.2 cpu-load-coder -- 1.3.6.1.4.1.3967.1.1.9.1.3 cpu-load-vca -- 1.3.6.1.4.1.3967.1.1.9.1.4 cpu-load -- 1.3.6.1.4.1.3967.1.1.10 poe-granted-power -- 1.3.6.1.4.1.3967.1.1.11 storage-load -- 1.3.6.1.4.1.3967.1.1.12 config-sealing-status -- 1.3.6.1.4.1.3967.1.1.13 humidity-valueTable -- 1.3.6.1.4.1.3967.1.1.13.1 humidity-valueEntry -- 1.3.6.1.4.1.3967.1.1.13.1.1 humidity-value -- 1.3.6.1.4.1.3967.1.2 video -- 1.3.6.1.4.1.3967.1.2.1 inputTable -- 1.3.6.1.4.1.3967.1.2.1.1 inputEntry -- 1.3.6.1.4.1.3967.1.2.1.1.1 input-source-val -- 1.3.6.1.4.1.3967.1.2.2 encoderTable -- 1.3.6.1.4.1.3967.1.2.2.1 encoderEntry -- 1.3.6.1.4.1.3967.1.2.2.1.1 video-encoder-status-ext -- 1.3.6.1.4.1.3967.1.2.2.1.2 video-encoder-encoded-bytes -- 1.3.6.1.4.1.3967.1.3 alarm -- 1.3.6.1.4.1.3967.1.3.1 video-alarmTable -- 1.3.6.1.4.1.3967.1.3.1.1 video-alarmEntry -- 1.3.6.1.4.1.3967.1.3.1.1.1 video-alarm-state -- 1.3.6.1.4.1.3967.1.3.2 motion-detectorTable -- 1.3.6.1.4.1.3967.1.3.2.1 motion-detectorEntry -- 1.3.6.1.4.1.3967.1.3.2.1.1 motion-alarm-state -- 1.3.6.1.4.1.3967.1.3.3 viproc-alarmTable -- 1.3.6.1.4.1.3967.1.3.3.1 viproc-alarmEntry -- 1.3.6.1.4.1.3967.1.3.3.1.1 viproc-alarm -- 1.3.6.1.4.1.3967.1.3.4 virtual-alarmTable -- 1.3.6.1.4.1.3967.1.3.4.1 virtual-alarmEntry -- 1.3.6.1.4.1.3967.1.3.4.1.1 virtual-alarm-state -- 1.3.6.1.4.1.3967.1.4 digital-io -- 1.3.6.1.4.1.3967.1.4.1 out -- 1.3.6.1.4.1.3967.1.4.1.1 relaisTable -- 1.3.6.1.4.1.3967.1.4.1.1.1 relaisEntry -- 1.3.6.1.4.1.3967.1.4.1.1.1.1 relay-output-state -- 1.3.6.1.4.1.3967.1.4.2 in -- 1.3.6.1.4.1.3967.1.4.2.1 input-pin-stateTable -- 1.3.6.1.4.1.3967.1.4.2.1.1 input-pin-stateEntry -- 1.3.6.1.4.1.3967.1.4.2.1.1.1 input-pin-state -- 1.3.6.1.4.1.3967.1.5 network -- 1.3.6.1.4.1.3967.1.5.1 interface -- 1.3.6.1.4.1.3967.1.5.1.1 mac-address -- 1.3.6.1.4.1.3967.1.5.1.2 ip-str -- 1.3.6.1.4.1.3967.1.5.1.3 subnet-str -- 1.3.6.1.4.1.3967.1.5.1.4 gateway-ip-str -- 1.3.6.1.4.1.3967.1.5.1.5 dhcp-val -- 1.3.6.1.4.1.3967.1.5.1.6 eth-link -- 1.3.6.1.4.1.3967.1.5.1.7 enable-traffic-led -- 1.3.6.1.4.1.3967.1.5.1.8 eth-link-statusTable -- 1.3.6.1.4.1.3967.1.5.1.8.1 eth-link-statusEntry -- 1.3.6.1.4.1.3967.1.5.1.8.1.1 eth-link-status -- 1.3.6.1.4.1.3967.1.5.1.9 dns-server-ipTable -- 1.3.6.1.4.1.3967.1.5.1.9.1 dns-server-ipEntry -- 1.3.6.1.4.1.3967.1.5.1.9.1.1 dns-server-ip -- 1.3.6.1.4.1.3967.1.5.1.10 dns-server-ip-stringTable -- 1.3.6.1.4.1.3967.1.5.1.10.1 dns-server-ip-stringEntry -- 1.3.6.1.4.1.3967.1.5.1.10.1.1 dns-server-ip-string -- 1.3.6.1.4.1.3967.1.5.2 snmp-Table -- 1.3.6.1.4.1.3967.1.5.2.1 snmp-Entry -- 1.3.6.1.4.1.3967.1.5.2.1.1 snmp-traps-host-str -- BSS-RCP-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises, Counter, TimeTicks, Gauge FROM RFC1155-SMI sysUpTime, DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; bss OBJECT IDENTIFIER ::= { enterprises 3967 } -- -- Divisions of Bosch Sicherheitssysteme Engineering GmbH -- rcp OBJECT IDENTIFIER ::= { bss 1 } sys OBJECT IDENTIFIER ::= { rcp 1 } identification OBJECT IDENTIFIER ::= { sys 1 } unit-name OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "WRITE: set unit name (max 31 unicode character + null delimiter) READ: read the unit name " ::= {identification 1} unit-id OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "WRITE: set unit ID (max 31 unicode character + null delimiter) READ: read the unit ID " ::= {identification 2} camnameTable OBJECT-TYPE SYNTAX SEQUENCE OF CamnameEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { identification 3 } camnameEntry OBJECT-TYPE SYNTAX CamnameEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { camname } ::= { camnameTable 1 } camname OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "WRITE: Deprecated! Use CONF_CAMNAME_LINES instead. (max 31 unicode character + null delimiter) READ: Deprecated! Use CONF_CAMNAME_LINES instead. " ::= {camnameEntry 1} CamnameEntry ::= SEQUENCE { camname DisplayString } hardware-version OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION " READ: read the hardware version " ::= {identification 4} software-version OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION " READ: read the software version " ::= {identification 5} serial-number OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " READ: returns the serial number of the device. The representation of this serial number is binary octets " ::= {identification 6} manufacturer-name OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION " READ: returns the manufacturer name " ::= {identification 7} time OBJECT IDENTIFIER ::= { sys 2 } timezone OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " READ: the timezone in which the unit has to operate (GMT +- nbr of seconds +- nbr of seconds DLS) " ::= {time 1} ntp-server-ip-str OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "WRITE: sets the ntp server ip (as string; xxx.xxx.xxx.xxx or URL) to sync time from READ: reads the time servers ip address (xxx.xxx.xxx.xxx, or URL) used to sync time from " ::= {time 2} time-sc-connect-fail-msg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " READ: neither read nor write access, only message, ##ValueList: 1=connect to server for time sync failed " ::= {time 3} connection OBJECT IDENTIFIER ::= { sys 3 } connect-to OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "READ: See RCP docu for command CONF_CONNECT_TO " ::= {connection 1} disconnect-primitive OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " READ: NOT_SUPPORTED " ::= {connection 2} viproc OBJECT IDENTIFIER ::= { sys 4 } viprocTable OBJECT-TYPE SYNTAX SEQUENCE OF ViprocEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { viproc 1 } viprocEntry OBJECT-TYPE SYNTAX ViprocEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { viproc-id } ::= { viprocTable 1 } viproc-id OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " READ: get the viproc interface id (0:= no viproc), nb: message is sent in host byte order " ::= {viprocEntry 1} viproc-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " READ: switches between viproc modes of the video content analysis (VCA). see detailed description ##desc:./doc/CONF_VIPROC_MODE.htm##. " ::= {viprocEntry 2} ViprocEntry ::= SEQUENCE { viproc-id INTEGER, viproc-mode INTEGER } aux OBJECT IDENTIFIER ::= { sys 5 } oem-device-name OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION " READ: get the oem device name " ::= {aux 1} oem-ext-id OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " READ: DEPRECATED: please use CONF_DEVICE_TYPE_IDS instead. Get the oem extension id " ::= {aux 2} defaults OBJECT-TYPE SYNTAX INTEGER ACCESS write-only STATUS optional DESCRIPTION "WRITE: sets config to default values except IP, subnet and gateway and resets the device. ATTENTION: Wait till board has fully rebooted before switching of power, to ensure that defaults are applied completly. Also propagade this to the user, that he has to wait until the reboot is complete. " ::= {aux 3} factory-defaults OBJECT-TYPE SYNTAX INTEGER ACCESS write-only STATUS optional DESCRIPTION "WRITE: set the configuration to factory defaults and reboot the device. ATTENTION: Wait till board has fully rebooted before switching of power, to ensure that defaults are applied completly. Also propagade this to the user, that he has to wait until the reboot is complete. " ::= {aux 4} board-reset OBJECT-TYPE SYNTAX INTEGER ACCESS write-only STATUS optional DESCRIPTION "WRITE: reboot the device " ::= {aux 5} boot-default-app OBJECT-TYPE SYNTAX INTEGER ACCESS write-only STATUS optional DESCRIPTION "WRITE: boot the default application " ::= {aux 6} led-blinking OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "WRITE: 1=power LED will flash for 7 sec READ: NOT_SUPPORTED " ::= {aux 7} bsp-dev-errorTable OBJECT-TYPE SYNTAX SEQUENCE OF Bsp-dev-errorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { aux 9 } bsp-dev-errorEntry OBJECT-TYPE SYNTAX Bsp-dev-errorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { bsp-dev-error } ::= { bsp-dev-errorTable 1 } bsp-dev-error OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " READ: number of bsp devices that encountered an error " ::= {bsp-dev-errorEntry 1} Bsp-dev-errorEntry ::= SEQUENCE { bsp-dev-error INTEGER } livetime-max-temp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " READ: read the highest temerature during device livetime in tenths of degrees Celsius " ::= {aux 10} livetime-min-temp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " READ: read the lowest temerature during device livetime in tenths of degrees Celsius " ::= {aux 11} livetime-op-minutes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " READ: read the operation hours counter (total device livetime) " ::= {aux 12} storage-list OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " READ: Read the device storage list. ##desc:./doc/CONF_STORAGE_LIST.htm## " ::= {aux 13} hd-rec-buffer OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "READ: See RCP docu for command CONF_HD_REC_BUFFER " ::= {aux 14} sd-card-life-span-statusTable OBJECT-TYPE SYNTAX SEQUENCE OF Sd-card-life-span-statusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { aux 15 } sd-card-life-span-statusEntry OBJECT-TYPE SYNTAX Sd-card-life-span-statusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { sd-card-life-span-status } ::= { sd-card-life-span-statusTable 1 } sd-card-life-span-status OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "READ: See RCP docu for command CONF_SD_CARD_LIFE_SPAN_STATUS " ::= {sd-card-life-span-statusEntry 1} Sd-card-life-span-statusEntry ::= SEQUENCE { sd-card-life-span-status OCTET STRING } login-limiter-message OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " READ: neither read nor write access, only message, see detailed description ##desc:./doc/CONF_LOGIN_LIMITER_MESSAGE.htm## " ::= {aux 16} power-supply OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " " ::= {sys 6} temperatureTable OBJECT-TYPE SYNTAX SEQUENCE OF TemperatureEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { sys 7 } temperatureEntry OBJECT-TYPE SYNTAX TemperatureEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { temp-sens } ::= { temperatureTable 1 } temp-sens OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " READ: value of the temperature sensor in tenths of degrees Celsius, specified by numdes, in case of negative temperature, the value wraps as 32 bit DWORD and needs to be casted to int " ::= {temperatureEntry 1} TemperatureEntry ::= SEQUENCE { temp-sens INTEGER } fan-speedTable OBJECT-TYPE SYNTAX SEQUENCE OF Fan-speedEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { sys 8 } fan-speedEntry OBJECT-TYPE SYNTAX Fan-speedEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { fan-speed } ::= { fan-speedTable 1 } fan-speed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " " ::= {fan-speedEntry 1} Fan-speedEntry ::= SEQUENCE { fan-speed INTEGER } cpu-loadTable OBJECT-TYPE SYNTAX SEQUENCE OF Cpu-loadEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { sys 9 } cpu-loadEntry OBJECT-TYPE SYNTAX Cpu-loadEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { cpu-load-idle } ::= { cpu-loadTable 1 } cpu-load-idle OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " READ: cpu load idle in percent " ::= {cpu-loadEntry 1} cpu-load-coder OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " READ: cpu load coder in percent " ::= {cpu-loadEntry 2} cpu-load-vca OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " READ: cpu load vca in percent " ::= {cpu-loadEntry 3} cpu-load OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "READ: See RCP docu for command CONF_CPU_LOAD " ::= {cpu-loadEntry 4} Cpu-loadEntry ::= SEQUENCE { cpu-load-idle INTEGER, cpu-load-coder INTEGER, cpu-load-vca INTEGER, cpu-load OCTET STRING } poe-granted-power OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " READ: read the current poe power granted by switch / midspan in tenths of Watts " ::= {sys 10} storage-load OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " READ: load of local storage in percent " ::= {sys 11} config-sealing-status OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " READ: return status of config seal, ##desc:./doc/CONF_CONFIG_SEALING_STATUS.htm## " ::= {sys 12} humidity-valueTable OBJECT-TYPE SYNTAX SEQUENCE OF Humidity-valueEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { sys 13 } humidity-valueEntry OBJECT-TYPE SYNTAX Humidity-valueEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { humidity-value } ::= { humidity-valueTable 1 } humidity-value OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " READ: value of the humidity sensor specified by numdes (humidity 0 ... 100.00 % maps onto values 0 ... 10000) " ::= {humidity-valueEntry 1} Humidity-valueEntry ::= SEQUENCE { humidity-value INTEGER } video OBJECT IDENTIFIER ::= { rcp 2 } inputTable OBJECT-TYPE SYNTAX SEQUENCE OF InputEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { video 1 } inputEntry OBJECT-TYPE SYNTAX InputEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { input-source-val } ::= { inputTable 1 } input-source-val OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "WRITE: ##ValueList: 1=camera; 2=vcr; 3=color_plane; 4=auto READ: ##ValueList: 1=camera; 2=vcr; 3=color_plane; 4=auto " ::= {inputEntry 1} InputEntry ::= SEQUENCE { input-source-val INTEGER } encoderTable OBJECT-TYPE SYNTAX SEQUENCE OF EncoderEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { video 2 } encoderEntry OBJECT-TYPE SYNTAX EncoderEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { video-encoder-status-ext } ::= { encoderTable 1 } video-encoder-status-ext OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " READ: get encoder status. ##Byte[0:4]: frames per 10 seconds ##Byte[4:4]: KBPS ##Byte[8:4]: grab frames per 10 seconds ##Byte[12:4]:lost frames per 10 seconds (lost frames fps*10 due to overload) ##Byte[16:4]:skipped frames per 10 seconds (skipped frame fps*10 due to configured enc interval in profile or STREAM_PRIORITY) " ::= {encoderEntry 1} video-encoder-encoded-bytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " READ: Get encoded bytes (32 Bit Counter) since bootup. Only supported for h.264 and Jpeg encoder. " ::= {encoderEntry 2} EncoderEntry ::= SEQUENCE { video-encoder-status-ext OCTET STRING, video-encoder-encoded-bytes INTEGER } alarm OBJECT IDENTIFIER ::= { rcp 3 } video-alarmTable OBJECT-TYPE SYNTAX SEQUENCE OF Video-alarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { alarm 1 } video-alarmEntry OBJECT-TYPE SYNTAX Video-alarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { video-alarm-state } ::= { video-alarmTable 1 } video-alarm-state OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " READ: 0=video alarm is off; 1=video alarm is on (no video signal detected at video input) " ::= {video-alarmEntry 1} Video-alarmEntry ::= SEQUENCE { video-alarm-state INTEGER } motion-detectorTable OBJECT-TYPE SYNTAX SEQUENCE OF Motion-detectorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { alarm 2 } motion-detectorEntry OBJECT-TYPE SYNTAX Motion-detectorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { motion-alarm-state } ::= { motion-detectorTable 1 } motion-alarm-state OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " READ: 0=motion alarm off; 1=motion alarm on (at elast one of the CONF_VIPROC_ALARM alarmbit (except the video loss alarm) is set " ::= {motion-detectorEntry 1} Motion-detectorEntry ::= SEQUENCE { motion-alarm-state INTEGER } viproc-alarmTable OBJECT-TYPE SYNTAX SEQUENCE OF Viproc-alarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { alarm 3 } viproc-alarmEntry OBJECT-TYPE SYNTAX Viproc-alarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { viproc-alarm } ::= { viproc-alarmTable 1 } viproc-alarm OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "READ: See RCP docu for command CONF_VIPROC_ALARM " ::= {viproc-alarmEntry 1} Viproc-alarmEntry ::= SEQUENCE { viproc-alarm OCTET STRING } virtual-alarmTable OBJECT-TYPE SYNTAX SEQUENCE OF Virtual-alarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { alarm 4 } virtual-alarmEntry OBJECT-TYPE SYNTAX Virtual-alarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { virtual-alarm-state } ::= { virtual-alarmTable 1 } virtual-alarm-state OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " READ: 0=virtual alarm off; 1=virtual alarm on " ::= {virtual-alarmEntry 1} Virtual-alarmEntry ::= SEQUENCE { virtual-alarm-state INTEGER } digital-io OBJECT IDENTIFIER ::= { rcp 4 } out OBJECT IDENTIFIER ::= { digital-io 1 } relaisTable OBJECT-TYPE SYNTAX SEQUENCE OF RelaisEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { out 1 } relaisEntry OBJECT-TYPE SYNTAX RelaisEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { relay-output-state } ::= { relaisTable 1 } relay-output-state OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "WRITE: set the logical level of an relay output READ: get the logical level of an relay output " ::= {relaisEntry 1} RelaisEntry ::= SEQUENCE { relay-output-state INTEGER } in OBJECT IDENTIFIER ::= { digital-io 2 } input-pin-stateTable OBJECT-TYPE SYNTAX SEQUENCE OF Input-pin-stateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { in 1 } input-pin-stateEntry OBJECT-TYPE SYNTAX Input-pin-stateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { input-pin-state } ::= { input-pin-stateTable 1 } input-pin-state OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " READ: 0=alarm input off; 1= alarm input on " ::= {input-pin-stateEntry 1} Input-pin-stateEntry ::= SEQUENCE { input-pin-state INTEGER } network OBJECT IDENTIFIER ::= { rcp 5 } interface OBJECT IDENTIFIER ::= { network 1 } mac-address OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " READ: read out the systems MAC address.##Num Values: 1=Ethernet; 2=WLAN; 3=Bluetooth " ::= {interface 1} ip-str OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "WRITE: Set the unit's IP address using string notation (xxx.xxx.xxx.xxx) READ: Read the unit's IP address using string notation (xxx.xxx.xxx.xxx)##Num Values: 0=Default; 1=Primary IP; 2=Auto IP (read direction) " ::= {interface 2} subnet-str OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "WRITE: set the subnet mask using string notation (xxx.xxx.xxx.xxx) READ: Read the subnet mask using string notation (xxx.xxx.xxx.xxx)##Num Values: 0=Default; 1=Primary IP Subnet; 2=Auto IP Subnet (read direction) " ::= {interface 3} gateway-ip-str OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "WRITE: set the gateway IP using string notation (xxx.xxx.xxx.xxx) READ: read the gateway IP using string notation (xxx.xxx.xxx.xxx) " ::= {interface 4} dhcp-val OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "WRITE: set DHCP mode READ: read DHCP mode ##Valuelist: 0=OFF; 1=ON (On write: Enables DHCP and kicks lease acquisition mechanism); 2=ON No Kick (Write only: enables DHCP mode in config, but does not kick lease acquisition mechanism); 3=ON+APIPA-Fallback " ::= {interface 5} eth-link OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "WRITE: (half duplex=HD, full duplex =FD) 0=auto, 1=10MbitHD, 2=10MbitFD, 3=100MbitHD, 4=100MbitFD, 5=1000MbitFD, 8=10GbitFD READ: (half duplex=HD, full duplex =FD) 0=auto, 1=10MbitHD, 2=10MbitFD, 3=100MbitHD, 4=100MbitFD " ::= {interface 6} enable-traffic-led OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "WRITE: Enables or disables the power LED. READ: power LED: 0=off; 1=on; 2=off 10 minutes after startup " ::= {interface 7} eth-link-statusTable OBJECT-TYPE SYNTAX SEQUENCE OF Eth-link-statusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { interface 8 } eth-link-statusEntry OBJECT-TYPE SYNTAX Eth-link-statusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { eth-link-status } ::= { eth-link-statusTable 1 } eth-link-status OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " READ: (half duplex=HD, full duplex =FD) 0=No link, 1=10MbitHD, 2=10MbitFD, 3=100MbitHD, 4=100MbitFD, 5=1000MbitFD, 7=Wlan; 8=10GbitFD " ::= {eth-link-statusEntry 1} Eth-link-statusEntry ::= SEQUENCE { eth-link-status INTEGER } dns-server-ipTable OBJECT-TYPE SYNTAX SEQUENCE OF Dns-server-ipEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { interface 9 } dns-server-ipEntry OBJECT-TYPE SYNTAX Dns-server-ipEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { dns-server-ip } ::= { dns-server-ipTable 1 } dns-server-ip OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "WRITE: set dns server ip/ipv6 READ: Get dns server ip/ipv6##Num Values: 0=Primary DNS; 2=Secondary DNS " ::= {dns-server-ipEntry 1} Dns-server-ipEntry ::= SEQUENCE { dns-server-ip INTEGER } dns-server-ip-stringTable OBJECT-TYPE SYNTAX SEQUENCE OF Dns-server-ip-stringEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { interface 10 } dns-server-ip-stringEntry OBJECT-TYPE SYNTAX Dns-server-ip-stringEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { dns-server-ip-string } ::= { dns-server-ip-stringTable 1 } dns-server-ip-string OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "WRITE: set dns server ip/ipv6 READ: Get dns server ip/ipv6##Num Values: 0=Primary DNS; 2=Secondary DNS " ::= {dns-server-ip-stringEntry 1} Dns-server-ip-stringEntry ::= SEQUENCE { dns-server-ip-string DisplayString } snmp-Table OBJECT-TYPE SYNTAX SEQUENCE OF Snmp-Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { network 2 } snmp-Entry OBJECT-TYPE SYNTAX Snmp-Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { snmp-traps-host-str } ::= { snmp-Table 1 } snmp-traps-host-str OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "WRITE: not documented READ: not documented " ::= {snmp-Entry 1} Snmp-Entry ::= SEQUENCE { snmp-traps-host-str DisplayString } END